2015年11月23日
ショットショーJAPAN用 特選中古品 Wilcox L2G05
今年も恒例 「ショットショーJAPAN in 心斎橋」 が12/4~5 もとい... 12/5(土)~6(日)で開催されます。
何を持っていくか悩むとこですが「これは持っていかないと!!」と言う商品を数回に分けて告知します。

Wilcox L2 G05 3 Hole MICH Helmet Bracket & NV Mount
P/N: 28300G01 & 28300G05B
The Wilcox L2 G05 Three Hole MICH Helmet Bracket with Integrated Breakaway Base and Universal
NVG Mount allows firm attachment to a MICH helmet drilled with the standard three-hole pattern.
This NVG Mounting System is unique in that it provides two modes of operation.
The first mode allows the Mount to break away from the base under a stressed condition, such as
when prompted by interference during fast roping, maritime operations, hard impact or when entering
or exiting mobility platforms. Without the Wilcox breakaway feature, the potential to induce neck injury
is increased. The second mode allows the Universal NVG Mount to securely lock the mount to the base.
Breakaway Feature allows Mount to Break Away under Stress, or to Securely Lock in Place by Means
of a Breakaway Switch
Can be Used with the Wilcox NVG Lanyard for Secure Attachment to an Array of NVG Devices
Preventing Loss of the NVG and Breakaway of the Wilcox Universal NVG Mount from the Helmet
Mount Base
•Each Mechanical Adjustment is Durable and Ergonomically Positioned for Easy One-Handed
Operation While Handling a Weapon
•Maintains a Very Low Profile Stance on the Helmet
•Flat Matte Finish for Covertness in Combat Conditions
•Thousands of Mounts of this Type Fielded to Date
•Combat Proven by the US Special Operations Community and Domestic Law Enforcement Personnel
•Breakaway Universal NVG Mount Interfaces with the Entire L2 Series of NVG Mounting Systems to
Include the NVG Ratchet Strap and NVG Skull/Head Mounting Systems
•Design Approach Cuts Down on Logistics and Overall System Cost
特殊部隊やるならやっぱこれを押さえないと・・・
Wilcox L2G05 官給放出中古品
放出品は基本ヘルメット固定用のネジがありませんが当店のはネジ付きなので3ホール付ヘルメット
には即装着可能。このネジかなり特殊なので入手困難です。
マウント側の受けネジが特殊ピッチネジなのでそちらもミリ規格のモノに変更すれば装着可能なので
すが出来ればオリジナルの特殊ネジを使いたいですからね・・・
官給放出中古品なので使い込み感ありますがその中でも選りすぐりの上物をチョイスして持って行き
ますのでご期待くださいね!!
お問合せはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp
http://modelshoppapa.shop-pro.jp/
モデルショップPAPA トップページ
http://blogs.yahoo.co.jp/hirokomama0527
モデルショップPAPAブログ
トレーニングウエポン関連、実物パーツや実物光学下取り&買取してます。お気軽にご相談下さい。
円安の為、輸入パーツは新規入荷分から価格改定中です。
何を持っていくか悩むとこですが「これは持っていかないと!!」と言う商品を数回に分けて告知します。

Wilcox L2 G05 3 Hole MICH Helmet Bracket & NV Mount
P/N: 28300G01 & 28300G05B
The Wilcox L2 G05 Three Hole MICH Helmet Bracket with Integrated Breakaway Base and Universal
NVG Mount allows firm attachment to a MICH helmet drilled with the standard three-hole pattern.
This NVG Mounting System is unique in that it provides two modes of operation.
The first mode allows the Mount to break away from the base under a stressed condition, such as
when prompted by interference during fast roping, maritime operations, hard impact or when entering
or exiting mobility platforms. Without the Wilcox breakaway feature, the potential to induce neck injury
is increased. The second mode allows the Universal NVG Mount to securely lock the mount to the base.
Breakaway Feature allows Mount to Break Away under Stress, or to Securely Lock in Place by Means
of a Breakaway Switch
Can be Used with the Wilcox NVG Lanyard for Secure Attachment to an Array of NVG Devices
Preventing Loss of the NVG and Breakaway of the Wilcox Universal NVG Mount from the Helmet
Mount Base
•Each Mechanical Adjustment is Durable and Ergonomically Positioned for Easy One-Handed
Operation While Handling a Weapon
•Maintains a Very Low Profile Stance on the Helmet
•Flat Matte Finish for Covertness in Combat Conditions
•Thousands of Mounts of this Type Fielded to Date
•Combat Proven by the US Special Operations Community and Domestic Law Enforcement Personnel
•Breakaway Universal NVG Mount Interfaces with the Entire L2 Series of NVG Mounting Systems to
Include the NVG Ratchet Strap and NVG Skull/Head Mounting Systems
•Design Approach Cuts Down on Logistics and Overall System Cost
特殊部隊やるならやっぱこれを押さえないと・・・
Wilcox L2G05 官給放出中古品
放出品は基本ヘルメット固定用のネジがありませんが当店のはネジ付きなので3ホール付ヘルメット
には即装着可能。このネジかなり特殊なので入手困難です。
マウント側の受けネジが特殊ピッチネジなのでそちらもミリ規格のモノに変更すれば装着可能なので
すが出来ればオリジナルの特殊ネジを使いたいですからね・・・
官給放出中古品なので使い込み感ありますがその中でも選りすぐりの上物をチョイスして持って行き
ますのでご期待くださいね!!
お問合せはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp
http://modelshoppapa.shop-pro.jp/
モデルショップPAPA トップページ
http://blogs.yahoo.co.jp/hirokomama0527
モデルショップPAPAブログ
トレーニングウエポン関連、実物パーツや実物光学下取り&買取してます。お気軽にご相談下さい。
円安の為、輸入パーツは新規入荷分から価格改定中です。
この記事へのコメント
12/5~6では?
Posted by ななっし~ at 2015年11月24日 17:37
>ななっし~様
ご指摘ありがとうございます(´Д`;)
お詫びとともに訂正しておきます・・・
ご指摘ありがとうございます(´Д`;)
お詫びとともに訂正しておきます・・・
Posted by papa
at 2015年11月24日 20:04
