2014年03月18日
Magpul XTM Enhanced Rail Panels
Magpul XTM Enhanced Rail Panels
The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny
rail without having to remove previously mounted accessories. Replacing the original XTM Panels,
The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention
of light/laser cables. The design and reinforced material construction ensure the panels will remain in place
under all operating conditions, but allows for easy removal using the tips of two rounds when necessary.
Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.
新型 ＸＴＭエンハンスドレールパネル
画像の様に色々なカラーを混ぜて使う事も可能です。
例のごとく黒とFDEしか入れてませんが...
在庫/価格のお問合せ/お求めはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp
2014年03月18日
Phoenix/Pegasus Clip Mount - Sand
Cejay Engineering Poseidon Phoenix/Pegasus Clip Mount - Sand
Cejay Engineering Poseidon Phoenix/Pegasus Clip Mount - Sand
NSN: 5340-01-598-4800
P/N: 902801S
The Poseidon™ Clip Mount Green (902801G) provides both a watertight and durable mounting system for the
complete Phoenix and Pegasus series of Infrared beacons. All deployed versions of Phoenix and Pegasus can
use the Poseidon Clip Mount. The mounting clip can be attached to PALS webbing, belts, or a uniform by using
the supplied locking spring clips or can be secured with bolts to rigid surfaces such as helmets and vehicles.
The beacon is attached to the battery and placed within the Poseidon Clip Mount. The clear top cover is placed
over the beacon and secured using the dual locking flanges forming a watertight seal . The clear top cover allows
for 360 degree visibility of the beacon. An included shield cap can be snapped in place over the top cover to focus
the signal emission to front and top only, giving the operator the choice of directing the signal emission.
SPECIFICATIONS
•Weight 51 Grams |1.8 ounces
•Size 70 x 53mm | 2.75” x 2.1”
•Capacity One Phoenix or Pegasus Series Beacon and Battery
•Watertight Tested to 46 Meters | 150 Feet
•Viewing angle 360 degree horizontal / 240 degree vertical without the shield cap fitted.
•The shield cap substantially reduces the viewing angle and limits signal transmission to top and front only
Included Accessories
•Poseidon Clip Mount, Directional Cover, Two locking spring clips , Zip Tie (not pictured)
Optional Accessories
•Poseidon Clip Mount Black (902801B)
•Poseidon Clip Mount Green (902801G)
•Poseidon Clip Mount Sand (902801S) NSN: 5340-01-598-4800
ＩＲストロボを収納するケースです。
上にスリットがあるので蓋をしたままでも敵味方識別が可能な程度の発光は見えそうです。
内蓋部分にＯリングもあるのである程度の防水機能はありそうですので屋外で長時間使う
場合はこのケースに入れて使う方が良いと思います。
特に９Ｖ電池を使うtypeのは基盤むき出しみたいな感じなので...
在庫/価格のお問合せ/お求めはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp
2014年03月18日
I2/MOD AN/PVS-14 Dual Tube Mounting System
I2/MOD AN/PVS-14 Dual Tube Mounting System L3 litton
MOD Armory's new D-14 Dual-PVS-14 Mounting System™ offers an adaptable system that can be configured as
a single-tube or dual-tube stereoscopic night vision system. The need for binocular depth perception is particularly
acute when operating at night, and users of single-tube PVS-7 or 14 systems are at a significant disadvantage
when it comes to effective tactical night movement. MOD Armory's new mounting system increases the flexibility
and utility of each separate PVS-14 by making it possible to rapidly detach one or both devices from the headgear
for use as a weapon-mounted night sight, for handheld use as a surveillance or observation device, and as a force
multiplier by distribution to others without night vision devices.
The unique design of the mounting system also allows one or both devices to be swung up 180 degrees, completely
out of the line of sight, without disturbing the eye alignment of the other device, and when the entire assembly is
folded back against the helmet the MOD Armory system allows both devices to be folded further back towards the
helmet than any other system. This feature decreases the chances of knocking the devices against branches,
doorframes or other obstacles as well as keeping the center of gravity of the helmet as far back as possible for
operator comfort.
The system comes standard with two mounting arms but it can be used with a single PVS-14 on either eye, without
anything interfering with the visual field of the opposite eye, and it can be instantly upgraded to a dual-tube system
whenever two suitable PVS-14 units are available.
The system offers redundancy, flexibility and ease of maintenance. Unlike a dedicated PVS-15 system, dual PVS-14s
give the user two separate power supplies, decreasing the potential for complete system failure.
Ease of replacement and repair are important in the tactical environment. Because the MOD Armory system can be
used with any standard ITT or L3 PVS-14, operators can freely swap, mix and match any suitable PVS-14 in a matter
of minutes. When mounted, both devices can be collimated for operator comfort.
Because the system is redundant, the failure of one device will not render the entire night vision system unusable.
Field-swapping a broken device for an operable one requires a few moments and an Allen wrench.
Moreover, the MOD Armory system does not interfere with the installation of the D-Loc PVS-14 weapon mount.
The MOD Armory Dual Tube PVS-14 Mounting System is compatible with all Wilcox and Norotos dovetail helmet mounts. .
AN/PVS14用デュアルマウントシステム Ｌ３用
他社でも似たシステムがありますがこの商品の優れた部分はワンタッチでPVS14を着脱可能な点です。
ただし、アーム形状をシビアに作っているのでＬ３(Litton)用とＩＴＴ用で差があります。
購入時にＬ３用かＩＴＴ用かを決めて買う必要があるので所持しているPVS14がＬ３とＩＴＴ混在の場合は少し
厄介な話になります。どうもオプションでアームだけの販売もしてくれるようですがＬ３用右とかＩＴＴ用左とか
全部で4種類あるので当方も全部揃えて持っている訳にも行かず結局はＬ３用の本体のみしか在庫できて
ません... もし混在用が欲しい場合はある程度の納期覚悟して下さい。
在庫/価格のお問合せ/お求めはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp
2014年03月18日
Phoenix JR. 123 Infrared Beacon
Cejay Engineering Phoenix JR. 123 Infrared Beacon
Phoenix JR.™ 123 is an extremely rugged and low cost Infrared marker beacon.
The Phoenix JR.™ 123 beacon was principally designed as an individual Combat Identification marker
employed to minimize fratricide (the inadvertent destruction of battle field assets by friendly forces.)
It can also been used as a vehicle ID marker, drop zone indicator and perimeter marker. Designed with
the same functionality as the Phoenix JR.™ it has been equipped with a spring clip for easy attachment
to belts, straps, clothing and equipment. Designed to use a CR123 Battery, the JR123 is 50% smaller
and lighter than the Phoenix JR. When not in use, the CR123 battery can be stored within the unit by
installing the battery upside-down.
初めてPVSを使って夜戦をした時に一番困ったのは敵味方の識別でした。特にインドアフィールドでの出会い頭
は思わず味方を撃ってしまいそうで一瞬躊躇してしまいます。そのゲームでは二名だけがＮＶを運用しており敵は
ＮＶ無しだったので極端な話、自分以外は全部撃ってやっつけてしまえば勝ちって話ですけど流石に味方のＮＶ
まで撃つのもなんなので(笑)
そこで登場するのがIRストロボです。たとえばインドアにおいても角を曲がって来る前に味方がIRストロボを点滅
させていれば壁に反射したIRストロボ光で誤射が防げます。無線を併用すればほぼ完璧に味方撃ちを防げます。
MS2000やMANTA等をヘルメットに装着しても良いのですが結構嵩張るので...
その点、このIRストロボは小さくてCR123一本あれば作動しBDUの胸ポケット等に入れていても光るのが判るの
でかなり便利です。夜戦の敵味方識別にどうですか？
また、比較的安価なので幾つか持ってクリアした部屋や味方の居る部屋のマーキングにも使えます。
CR123用の他に9V四角電池仕様もあります。
在庫/価格のお問合せ/お求めはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp