2014年04月04日

N7511モーターのローター交換 その2

さて、ローター交換の手順です。
一番最初に行うのはブラシを外す事です。意外と忘れやすいので気を付けて下さい。

次に行うのはピニオンギアを外す事です。細い六角レンチを使いますがこのイモネジを緩める
前に必ずピニオンギアをバーナーで焼いて下さい。
焼かずに緩む場合もありますが下手するとこの細い六角ネジを潰してしまい悲しい目に遭う
可能性大です。軽くバーナーで炙ってやるとネジロックから煙が出て来ますのでその程度焼
けば緩むと思います。六角レンチを挿したまま炙ると六角レンチが焼ナマリますのでご注意
下さい。


焼いたら六角レンチで回転止めの六角ネジを緩めてピニオンを抜きます。
前もってピニオンの位置を確認(デジカメで撮影する等)し再度取り付ける際の参考にして下さい。

次はモーターベースを固定している4本のイモネジを緩めます。

これは特筆する様な事は無く普通に4本抜き取ります。失くさない様に...


次はモーターベースをマグネットケースから引き抜きましょう。
これは忍耐が必要です。少しずつ抉って抜いて行きます。
無茶してハンマーで叩いたりすると変形や破損を招きます...泣

次回へ続く

  

Posted by papa at 20:03Comments(0)トレポン講座

2014年04月04日

A.R.M.S. #18 M21/M14 Scope Mount Foundation


A.R.M.S. #18 M21/M14 Scope Mount Foundation


A.R.M.S. #18 M21/M14 SCOPE MOUNT FOUNDATION

Since its introduction to the marketplace in 1989, this foundation has maintained its reputation as being the
best mounting systems for the M21/M14 Rifle. The A.R.M.S.® #18 offers interchangeability of Day & Night
Vision, with an ultra low profile and the A.R.M.S., SWAN ® aka Mil-Std. 1913 Rail. Made of 8620 case
hardened steel. Precision fit to the base integral with the receiver. Two attaching points plus a third contact
point for ultimate stability.

M14、M21用スコープマウントベース 入荷


A.R.M.S.製 M14/M21用のスコープマウントベースです。
滅多に入荷しないモノなので探していた人は是非この機会にどうぞ・・・


在庫/価格のお問合せ/お求めはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp


  

2014年04月04日

AIMPOINT COMP M4 - 2MOA


AIMPOINT COMP M4 - 2MOA


The Aimpoint CompM4 series of sights are the finest sights that Aimpoint has ever produced.
Improvements include improved energy efficiency that provides up to 8 years of continuous
use from a single AA battery! The CompM4 sights incorporate an integral mount that eliminates
the need for a separate ring, and can be customized with vertical and forward spacers to fit a
variety of weapon systems. They can also be used by hunters and sport shooters that need
night vision compatibility. To accommodate our customers, the CompM4 series of sights are
available in two versions: The CompM4 offers a high battery compartment, while the CompM4s
offers a low battery compartment. In all other aspects, the Aimpoint CompM4 and Aimpoint CompM4s are identical.

The CompM4 is now the latest version of the US Army’s M68 CCO (Close-Combat Optic),
continuing a legacy that Aimpoint has maintained since 1997.

The performance of the CompM4 series of sights is optimized for use with all generations of
night vision devices (NVDs), but is especially suited for 3rd generation night vision technology.
Aimpoint’s unique band-pass coating on the front lens reflects select frequencies of red light at
near 100% efficiency in order to give the highest possible dot brightness with the smallest
amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part
of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation
NVD. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright
setting, the CompM4 and CompM4s are ready for use around the clock.

Specifications:

◾Compatible with every generation of Night Vision Devices (NVD)
◾Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
◾Internal voltage regulator allows the CompM4 to be used with any AA size battery.
◾Seven night vision compatible settings and 9 daylight settingsr
◾QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter
  to improve operation, and lessen the chance of becoming snagged on other gear.
◾Mount base is “keyed” into to the body of the sight to absorb recoil.
◾ Mount base screws directly into the sight – no separate sight ring is required.
◾500,000 hours of use on NVD setting
◾2 MOA dot for close combat and long distance engagement
◾Matches perfectly with Aimpoint 3XMag, (magnifier module).
◾Unequalled light transmission.
◾Front lens opening is threaded for addition of killFlash® anti-reflective device.
◾Submersible to 150 feet (45 meters)
◾Vertical spacer included
◾Standardized as the US Army’s new M68CCO
◾Improved adjustment caps are easier to remove, and are protected against impact.
◾Can be used with a carry handle adaptor for use on all M16 rifles.

Configuration:
◾Comp M4 Optic wQRP2 Mount (Pictured)
◾Comp M4 Optic ONLY - NO Mount

AIMPOINT 官給COMP-M4 入荷


気が遠くなる程の電池のランタイムです...
電池なくなる前に銃が壊れると思います。

NVポジションx7 DAYLightポジションx9

必要にして充分な調整範囲。NV運用も余裕で可能。
買うしかないでしょ...

当初は好きなマウント選べませんでしたが最近は各社から
M4用マウント出てます。

まぁ官給マウントも結構良いのでお奨めですが・・・
一個だけの入荷です。売れそうならまた仕入れますが(笑)


在庫/価格のお問合せ/お求めはモデルショップPAPAまで
メール hirokomama0527@yahoo.co.jp



  

Posted by papa at 10:03Comments(0)実物光学系